 | |
 | | SYS-6048R-TXR |
- SuperServer 6048R-TXR (Black)
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 512 ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| Serial ATA |
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A)
- 4x USB 2.0 ports (2 rear, 2 via headers)
|
| Video |
|
| Serial Port / Header |
- 2x COM ports (1 rear, 1 Header)
|
| DOM |
- 2x SuperDOM (Disk on Module) ports
|
| TPM |
|
| |
|
| PCI-Express |
- 10x PCI-E 3.0 x8 slots
- 1x PCI-E 2.0 x4 (in x8) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS rescue hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
|
| |
| | Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit
|
| Model |
|
| | |
| | Width |
|
| Height |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System information (overheat/UID) LED
- Power Fail LED
|
| Ports |
- 2x USB 2.0 ports
- 1x COM port
|
| | |
| | Hot-swap |
- 5x 3.5" Hot-swap Drive Trays
|
| 90° Rotatable |
- 3x 5.25" Peripheral Drive Trays
|
| | |
| | DVD-ROM |
- 1x slim DVD-ROM drive (optional)
|
| |
| | SAS / SATA Hard Drive Backplane w/AMI MG9072 |
| | |
| | Fans |
- 1x 92x38mm 4-pin PWM front intake fan
- 2x 80x38mm 4-pin PWM rear exhaust fans
|
| | |
| | 600W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-240V, 50-60Hz, 7.5-3.5A
|
| +12V |
|
| +5Vsb |
|
| Output Type |
- Gold Finger Connector Mating with Molex 45984-4343
|
| Certification |
Platinum Certified
[ Test Report ]
|
| |
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN |
- Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
